Network Settings (Common Settings) 7 - peplink ONE One User Manual

DHCP Relay
Enter the address of the DHCP server here. DHCP requests will be relayed to it.
DHCP requests from the LAN are relayed to the entered DHCP server.
DHCP Server
For active­passive DHCP server configurations, enter active and passive DHCP server IPs
IP Address
into the D HCP Server 1 and D HCP Server 2 fields.
This feature includes device information as relay agent for the attached client when
DHCP Option
forwarding DHCP requests from a DHCP client to a DHCP server. Device MAC address and
82
network name are embedded to circuit ID and Remote ID in option 82.
DHCP Relay
Check this box to log DHCP relay activity.
Logging
12.2.2 Network Settings (Common Settings)
This table is for defining static routing rules for the LAN segment. A static route consists of
the network address, subnet mask, and gateway address. The address and subnet mask
values are in w .x.y.z f ormat.
The local LAN subnet and subnets behind the LAN will be advertised to the VPN. Remote
Static Route
routes sent over the VPN will also be accepted. Any VPN member will be able to route to
the local subnet. Click
Entries in this list will allow traffic to route to a different subnet that is connected to the LAN
interface. Any traffic destined for a network/mask pair will be directed to the corresponding
gateway instead of routed through WANs.
In case of a network address conflict with remote peers (i.e. PepVPN / IPsec VPN / IP Forwarding WAN
https://www.peplink.com
DHCP Relay Settings
Static Route Settings
to create a new route. Click
75
to remove a route.
Copyright @ 2019 Peplink