Program Edit Mode; Multi Mode - Kurzweil FlashPlay PC 4 SE Getting Started Manual

Modes
Program Mode
The PC4 SE always powers up in Program Mode, where single instrument sounds can be
played directly from the keyboard, or multitimbrally via MIDI.
Saving Programs
If you make changes to the current Program using any of the controllers (Knobs, Sliders,
Buttons, Wheels), the SAVE button turns on to indicate that a change has been made to that
Program.
To save a copy of the Program with the changes you've made, press the SAVE button once to
view the Save Dialog. The Save Dialog allows you to choose an ID number and name for the
Program you are saving. Use the CHANNEL/PAGE buttons to switch between ID selection
and naming pages. On the Program Save Page, press the SAVE button again to save the
Program as a User Program.

Program Edit Mode

Program Edit Mode allows you adjust the current Program's Arpeggiator settings, select
parameters for the assignable controllers, and adjust other Program parameters. See above for
details on saving an edited Program as a User Program.

Multi Mode

Multi Mode allows you to play Multis, which are arrangements of up to 5 Programs split
and/or layered in Zones across selected ranges of the keyboard. The volume of the Program
in each Zone can be easily adjusted while playing by using the sliders, and each Zone can be
turned on or off by using the buttons below these sliders.
Controller settings can be adjusted in Multi Edit Mode.
Multi Edit Mode
Multi Edit Mode is used to modify the many parameters that make up Multis, including
Program Selection, Key Range, Volume, Pan, and Controller assignments. Use Multi Edit
Mode to create custom sound combinations.
Modes
Program Mode
17