Powering Down The Frame - HPE Synergy 12000 Frame Maintenance And Service Manual

Powering down the frame

Powering down the
Procedure Procedure
1. If the frame to be powered down is part of a multiframe management ring with Image Streamer, see Powering down an HPE Synergy
frame that is part of a multiframe management ring with Image Streamer.
2. Locate the frame to be powered down .
3. Verify that the compute module UID LED is not flashing blue and that the compute module is in standby mode.
For more information, see the compute module user guide on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/synergy-docs http://www.hpe.com/info/synergy-docs).
4. Power down all compute modules .
5. Power down all appliance modules .
6. Verify that all LEDs indicate that all devices are powered off.
7. Disconnect all power cables from the power supplies in the frame.
frame
Powering down the frame 51