HPE Synergy 12000 Frame Maintenance And Service Manual page 4

3.5 Removing and replacing bezels
3.6 Removing and replacing a device bay blank
3.7 Removing and replacing a device bay shelf
3.8 Removing the half shelf
3.8.1 Replacing the half shelf
3.9 Replacing the half shelf
3.10 Removing and replacing an appliance bay blank
3.11 Removing and replacing hot-plug fans
3.12 Removing and replacing a frame lift handle
3.13 Removing and replacing a frame link module blank
3.14 Removing and replacing a frame link module
3.15 Removing and replacing a front panel assembly
3.16 Removing and replacing an interconnect module blank
3.17 Removing and replacing an interconnect module
3.18 Removing and replacing a power supply blank
3.19 Removing and replacing a power supply
3.20 Removing and replacing a -48V DC power supply
3.20.1 Replacing the -48V DC power supply
3.21 Removing and replacing a rear cage
3.22 Removing and replacing the rack rails
3.22.1 Replacing the rack rails
4 Component and LED identification
4.1 Information pull tabs
4.2 Frame front components and device bays
4.2.1 Device bay numbering
4.2.1.1 Device bay partitions
4.2.2 Front panel components
4.2.3 Appliance module LEDs and components
4.2.3.1 Appliance bay numbering
4.2.4 Compute module LEDs and buttons
4.2.4.1 System power LED definitions
4.2.4.2 NVDIMM LED identification
4.2.4.2.1 NVDIMM-N LED combinations
4.2.4.2.2 NVDIMM Function LED patterns
4.2.5 Storage module LEDs
4.3 Frame rear components
4.3.1 Rear component bay numbering
4.3.2 HPE Synergy 4-Port Frame Link Module components and LEDs
4.3.3 HPE Synergy Frame Link Module components and LEDs
4.3.4 Power supply LED
4.3.5 Fan LED
4.3.6 HPE Synergy 10Gb Interconnect Link Module LEDs and buttons
4.3.7 HPE Synergy 10Gb Interconnect Module interconnect link port
4.3.8 HPE Synergy 20Gb Interconnect Link Module LEDs and buttons