Settings; Information List - Siemens SIPROTEC 7SJ61 Manual

2.1.2.3 Settings

Addr. Parameter
610 FltDisp.LED/LCD
640 Start image DD

2.1.2.4 Information List

No. Information
- >Light on
- Reset LED
- DataStop
- Test mode
- Feeder gnd
- Brk OPENED
- HWTestMod
- SynchClock
- Error FMS1
- Error FMS2
- Distur.CFC
1 Not configured
2 Non Existent
3 >Time Synch
5 >Reset LED
15 >Test mode
16 >DataStop
51 Device OK
52 ProtActive
55 Reset Device
56 Initial Start
67 Resume
68 Clock SyncError
69 DayLightSavTime
70 Settings Calc.
71 Settings Check
72 Level-2 change
73 Local change
110 Event Lost
113 Flag Lost
125 Chatter ON
140 Error Sum Alarm
144 Error 5V
SIPROTEC, 7SJ61, Manual
C53000-G1140-C210-1, Release date 02.2008
Setting Options
Target on PU
Target on TRIP
image 1
image 2
image 3
image 4
Type of In-
formation
SP >Back Light on
IntSP Reset LED
IntSP Stop data transmission
IntSP Test mode
IntSP Feeder GROUNDED
IntSP Breaker OPENED
IntSP Hardware Test Mode
IntSP_Ev Clock Synchronization
OUT Error FMS FO 1
OUT Error FMS FO 2
OUT Disturbance CFC
SP No Function configured
SP Function Not Available
SP_Ev >Synchronize Internal Real Time Clock
SP >Reset LED
SP >Test mode
SP >Stop data transmission
OUT Device is Operational and Protecting
IntSP At Least 1 Protection Funct. is Active
OUT Reset Device
OUT Initial Start of Device
OUT Resume
OUT Clock Synchronization Error
OUT Daylight Saving Time
OUT Setting calculation is running
OUT Settings Check
OUT Level-2 change
OUT Local setting change
OUT_Ev Event lost
OUT Flag Lost
OUT Chatter ON
OUT Error with a summary alarm
OUT Error 5V
Default Setting
Target on PU Fault Display on LED / LCD
image 1 Start image Default Display
Comments
Functions
2.1 General
Comments
33