Table of Contents
Advertisement
Front view
See this topic to learn about the controls, LEDs, and connectors on the front of the server.
Note: All the slot/bay numbers in this topic are listed from top to bottom.
Figure 5. Front view
Table 5. Components on the front view
"Riser 1" on page 17
1
"Riser 2" on page 17
2
swap Drive 4 and 5)
"Power supply units" on page 18
3
"Power supply LEDs" on page 18
4
"Threaded studs for grounding" on page 18
5
"USB 2.0 with Lenovo XClarity Controller
6
management" on page 18
"NMI button" on page 18
7
1
Riser 1 (PCIe slot 5 and 6)
Supports the following:
• Single-width PCI Express 4.0 x16/x8 (Slot 5, 6)
• Single-width PCI Express 4.0 x16/x16 (Slot 5, 6)
• Single/double-width PCI Express 4.0 x16 (Slot 5)
2
Riser 2 (PCIe Slot 3 and 4 / Hot-swap Drive 4 and 5)
Supports the following:
• Single-width PCI Express 4.0 x8/x16 (Slot 3, 4)
• Single-width PCI Express 4.0 x16/x16 (Slot 3, 4)
• Single/double-width PCI Express 4.0 x16 (Slot 4)
(PCIe slot 5 and 6)
(PCIe Slot 3 and 4 / Hot-
(Bay 2 and 1)
"USB 3.0 connectors (1 and 2)" on page 18
8
"Front operator panel" on page 18
9
"External diagnostic handset connector" on page 18
10
"VGA connector" on page 19
11
"XClarity Controller (XCC) network connector" on
12
page 19
"OCP 3.0 adapter" on page 19
13
(PCIe Slot 7)
.
Chapter 2
Server components
17
Advertisement
Table of Contents
