Table of Contents
Advertisement
Figure 78. Removing the OCP filler
Note: There are two types of OCP filler. The one is secured with a screw, while the other is
not.
b.
Remove PCIe riser 1 if applicable (see
page
100).
c.
Align the pointed ends of two triangles on the OCP cable and OCP cage, and secure the cable
with two screws.
Figure 79. Installing the OCP cable
d.
Connect the OCP cable to the system board. Make sure to contain the cable with the clip as
illustrated.
ThinkEdge SE450 Maintenance Manual
98
"Remove the PCIe riser assemblies and adapters" on
Advertisement
Table of Contents
