Table of Contents
Advertisement
Watch the procedure.
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DV_Ja2E7l6T-lwN_IrnJRk
Procedure
Step 1.
Make preparations for this task.
1. If applicable, remove the security bezel (see
2. Remove the top covers (see
3. Remove the air baffle (see
4. Remove PCIe riser 1 (see
Step 2.
Disconnect the serial port cable from the system board.
Figure 140. Disconnecting the serial port cable
Step 3.
Open the retainer, and remove the screws that secures the module to the riser.
ThinkEdge SE450 Maintenance Manual
146
A video of this procedure is available from the following link:
"Remove the top covers" on page
"Remove the air baffle" on page
"Remove the PCIe riser assemblies and adapters" on page
"Remove the security bezel" on page
168).
43).
137).
100).
Advertisement
Table of Contents
