Shock And Vibration Specifications; Particulate Contamination - Lenovo ThinkEdge SE450 Maintenance Manual

Table of Contents

Advertisement

Shock and vibration specifications

The following information is a summary of the shock and vibration specifications of the server. Depending on
the model, some features might not be available, or some specifications might not apply.
Table 2. Shock and vibration specifications
SE450 system
Vibration (when
configuration
server is in operation)
300mm and 360mm
0.21Grms, 5-500 Hz,
15 min/axis

Particulate contamination

Attention: Airborne particulates (including metal flakes or particles) and reactive gases acting alone or in
combination with other environmental factors such as humidity or temperature might pose a risk to the
device that is described in this document.
Risks that are posed by the presence of excessive particulate levels or concentrations of harmful gases
include damage that might cause the device to malfunction or cease functioning altogether. This
specification sets forth limits for particulates and gases that are intended to avoid such damage. The limits
must not be viewed or used as definitive limits, because numerous other factors, such as temperature or
moisture content of the air, can influence the impact of particulates or environmental corrosives and gaseous
contaminant transfer. In the absence of specific limits that are set forth in this document, you must
implement practices that maintain particulate and gas levels that are consistent with the protection of human
health and safety. If Lenovo determines that the levels of particulates or gases in your environment have
caused damage to the device, Lenovo may condition provision of repair or replacement of devices or parts
on implementation of appropriate remedial measures to mitigate such environmental contamination.
Implementation of such remedial measures is a customer responsibility.
Shock (when server
Environmental criteria (NEBs GR63)
is in operation)
15G, 3ms, half-sine,
Office vibration
±X, ±Y, ±Z
0.21Grms, 5-100 Hz,
30 min/axis
Earthquake test
GR63 earthquake
zone 4
.
Chapter 1
Introduction
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

7d8t

Table of Contents