Lenovo ThinkEdge SE450 Maintenance Manual page 94

ndctl destroy-namespace all -f
– Windows Powershell command
Get-PmemDisk | Remove-PmemDisk
d. Clear Platform Configuration Data (PCD) and Namespace Label Storage Area (LSA) with
the following ipmctl command (for both Linux and Windows).
ipmctl delete -pcd
Notes: See the following links to learn how to download and use impctl in different
operating systems:
– Windows:
– Linux:
e. Reboot the system.
2. If applicable, remove the security bezel (see
3. Remove the top covers (see
4. Remove the air baffle (see
5. Locate the memory module to be removed on the system board, and remove the
corresponding components.
Figure 65. Memory module slots on the system board
• To remove DIMM 1 to 5: remove Riser 2.
• To remove DIMM 6 to 10: remove Riser 1.
See "Remove the PCIe riser assemblies and adapters" on page 100
corresponding to the present system configuration.
Step 2. Remove the memory module.
ThinkEdge SE450 Maintenance Manual
86
https://datacentersupport.lenovo.com/us/en/videos/YTV101407
https://datacentersupport.lenovo.com/us/en/solutions/HT508642
"Remove the top covers" on page
"Remove the air baffle" on page
"Remove the security bezel" on page
168).
43).
137).
for the topic