Figure 85. Removing an adapter from the riser
Remove PCIe riser 2 with AnyBay drive cage
Step 1.
Remove the power and signal cables from the AnyBay drive cage.
Step 2.
Loosen the two captive screws; then, lift the riser assembly to remove it from the chassis.
Figure 86. Removing PCIe riser 2 with drive cage
Step 3.
Gently rotate the release latch away to unlock the drive handle; then, grasp and pull the handle to
remove the drive from the drive bay.
ThinkEdge SE450 Maintenance Manual
102