Equipment Required - Agilent Technologies 53150A Service Manual

Chapter 1 Performance Tests

Equipment Required

Equipment Required
Table 1-1 lists the test equipment and accessories needed to perform the tests.
Table 1-1. Recommended Test Equipment and Accessories
Instrument Type
Synthesized Signal Generator
Microwave Synthesized
Signal Generator
Microwave Amplifier
Power Meter
Power Sensor
Power Sensor Cable
50 Ω Feedthrough Terminator
20 dB Attenuator
Power Splitter
Cables
Adapters
* Equivalent equipment can be substituted for all instruments and accessories.
** OV = Operational Verification P = Performance Tests C = Calibration T = Troubleshooting
1-4
Required Characteristics
10 Hz to 20 MHz
+7 dBm to –40 dBm
10 MHz to 50 GHz
-10
Accuracy >1 x 10
+7 dBm to –50 dBm
45 MHz to 50 GHz
50 MHz to 50 GHz
+13 dBm to –50 dBm
50 MHz to 50 GHz
+13 dBm to –50 dBm
2.4 mm to 2.4 mm, 5 ft.
50 Ω (m to f) BNC
DC to 50 GHz
2.4 mm (m) to 2.4 mm (f)
DC to 50 GHz
2.4 mm (f3x)
BNC (m) to BNC (m)
2.4 mm (m) to 2.4 mm (m)
BNC (m) to SMA (f)
3.5 mm (f) to 2.92 mm (m)
2.92 mm (m) to 2.4 mm (m)
2.92 mm (m) to 2.4 mm (f)
2.4 mm (m) to 2.4 mm (m)
2.4 mm (f) to 2.4 mm (f)
Model Quantity
Recommended * Required
Agilent 3325A/B 2
Agilent 83650B 1
Agilent 83051A 1
Agilent 437B 1
Agilent 8487A/D 1
Agilent 11730A 1
Agilent 10100C 1
Agilent 8490D 1
(Opt. 020)
Agilent 11667C/D 1
Agilent 10503 series 2
— 2
Agilent 1250-2015 1
— 1
Agilent 11904A 1
Agilent 11904D 1
Agilent 11900A 1
Agilent 11900B
Assembly Level Service Guide
Use **
OV, P, T
P, T
P, T
P, T
P, T
P, T
OV, P, T
P, T
P, T
OV, P, C, T
P, T