Kohler LH630-775 Service Manual page 173

Figure 11-113. Installing Upper Hose Connection.
Figure 11-114. Installing Lower Radiator Hose
Clamp.
6. Check for adequate clearance between fan and
shroud. Adjust the lower radiator supports as
required, then torque the four mounting screws
to 9.9 N·m (88 in. lb.). See Figures 11-115 and
11-116.
Figure 11-115. Fan Clearance Checking.
Clearance
Figure 11-116. Torquing Side Support Screws.
7. Hold the radiator assembly in position; then
torque the screws securing the two upper
radiator supports to 9.9 N·m (88 in. lb.). See
Figure 11-117.
Figure 11-117. Torquing Upper Bracket Screws.
8. If the two flange nuts securing the upper
brackets to the top radiator mounts were
loosened, torque to 9.9 N·m (88 in. lb.). See Figure
11-118.
Section 11
Reassembly
11
11.31