Kohler LH630-775 Service Manual page 115

Liquid-cooled horizontal crankshaft
Table of Contents

Advertisement

Section 9
Disassembly
Figure 9-10. Disconnecting Upper and Lower
Radiator Hose.
4. Remove the four screws securing the two upper
radiator supports to the air cleaner mounting
bracket. See Figure 9-11.
Figure 9-11. Remove Upper Radiator Support
Screws.
5. Carefully tilt (pull) the radiator forward slightly
to clear the fan and lift the complete assembly
out of the lower mounting bracket. See Figure
9-12.
NOTE: Do not allow the cooling fins of the
radiator to contact the fan blades.
9.4
Figure 9-12. Removing the Radiator.
6. Disconnect the connector plug from the rectifier-
regulator and remove the mounting plate, with
rectifier-regulator attached.
Figure 9-13. Disconnecting the Rectifier-Regulator.
7. Remove the four screws securing the LH and RH
side mounting brackets to the crankcase. Pull the
complete mount assembly forward to remove.
See Figure 9-14.
Figure 9-14. Removing LH and RH Mounting
Brackets/Screws.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents