Kohler LH630-775 Service Manual page 172

Section 11
Reassembly
Figure 11-109. Preassembled Radiator for
Installation.
2. Tighten the radiator drain plug. See Figure
11-110.
Figure 11-110. Tightening Drain Plug.
3. Carefully set the radiator assembly into place,
guiding the lower radiator hose inside RH
support bracket. Make sure that cooling fins do
not come in contact with the fan blades as
radiator is installed.
11.30
Figure 11-111. Setting Radiator Assembly into
Place.
4. Position the upper radiator support brackets on
top of the air cleaner mounting bracket. Install
and finger tighten the four mounting screws.
Figure 11-112. Installing Upper Support Screws.
5. Connect the upper and lower radiator hoses to
the inlets of the radiator and water pump. Secure
with the hose clamps. See Figures 11-113 and
11-114. Make sure the tangs of upper clamp face
away from the fan.