Kohler LH630-775 Service Manual page 168

Section 11
Reassembly
Figure 11-90. Lower Pulley and Shim Details.
Figure 11-91. Installing Lower Pulley.
4. Install the upper fan mounting bracket to the
intake manifold with the two screws. See Figure
11-92. Torque:
M6 Screws to 7.3 N·m (65 in. lb.)
M8 Screws to 24. 4 N·m (216 in. lb.)
The by-pass hose and wires must be positioned
within the cutout in the intake manifold, as
shown in Figure 11-93. Be careful not to pinch the
harness wires between the bracket and intake
manifold when tightening.
11.26
Figure 11-92. Installing Upper Pulley Bracket.
Figure 11-93. Wiring Through Intake Manifold
Cutout and Behind Upper Bracket.
5. If disassembled, reassemble the fan and pulley
assembly as shown in Figures 11-94, 11-95, and
11-96.
Figure 11-94. Fan Assembly Components -
Disassembled Layout.