Configuring Conditional Access - Sencore AG 6000 User Manual

3.2.9

Configuring Conditional Access

This section will describe how to configure descrambling in the AG 6000. The AG 6000
allows decoding of BISS 1 and BISS 2 with additional licensing.
Note: BISS 1 and BISS 2 descrambling are licensed separately.
3.2.9.1 BISS 1 Descrambling
This menu allows the user to configure BISS descrambling. 12 unique BISS keys can be
entered. Clicking on the gear icon allows the user to configure BISS 1.
Setting
Operation Mode
Selected Key
Alias
Mode
Mode 1 Session
Word
Page 45 (122)
AG 6000 – User Manual
Range
Enabled
Disabled
Key 1 - 12
16 characters
Mode 1
Mode E
N/A
Description
Enable / Disable BISS descrambling
Select a key to configure
Set an Alias for the selected key
This setting sets the Mode of the BISS key
that has scrambled the transport stream.
If Mode 1 is selected the user enters the
BISS session word here.