Table of Contents
Advertisement
DVB-S/S2 Input Module Option
General –
Frequency Range:
Number of inputs:
Connector:
Impedance:
Return Loss:
Separation:
RF frequency:
Tuning:
Satellite frequency:
LO frequency:
Packet size:
Tuning Step Size:
Nyquist root filter roll-off factors:
RF Input Level:
AFC Tuning Range:
Input RF Spectrum:
PL Scrambling Codes supported:
Image Rejection:
Noise Figure:
Max TS Bitrate:
LNB Power and 22 kHz Tone –
LNB Power
Page 107 (122)
AG 6000 – User Manual
4≤D≤20
950 MHz – 2150 MHz
2 (A, and B)
2x BNC, Female
75Ω
>9 dB
>50 dB adjacent, >60 dB non-adjacent
950 MHz to 2150 MHz in 100 kHz steps
Difference between Satellite frequency and LO
frequency
950 – 14500 MHz
0 – 12000 MHz, with presets of 0, 5150, 9750,
10600, 10750 and 11250 MHz
188 bytes
125 kHz, maximum
0.05, 0.1, 0.15, 0.2, 0.25, 0.35
-65 dBm to -25 dBm
± 0.5 MHz in Standard and Wide mode (with SR
0.5 ≤ 1 Msps)
± 1 MHz in Standard and Wide mode (with SR 1
≤ 2 Msps)
± 1.5 MHz in Standard and Wide mode (with SR
2 ≤ 3 Msps)
± 2 MHz in Standard and Wide mode (with SR 3
≤ 4 Msps)
± 2.5 MHz in Standard and Wide mode (with SR
4 ≤ 5 Msps)
± 3 MHz in Standard mode (with SR ≥ 5 Msps)
± 4 MHz in Wide mode (with SR 5 ≤ 6 Msps)
± 5 MHz in Wide mode (with SR ≥ 6 Msps)
Standard / Wide modes user selectable
Normal/Inverted Auto Detect
0-262,141
>30dB
<15dB, maximum
160 Mb/s
Off/13/14/18/19VDC @ >450mA
Advertisement
Table of Contents
