Sencore AG 6000 User Manual page 48

Setting
Selection Mode
On Backup
Page 48 (122)
AG 6000 – User Manual
Service Lock Selection Menu
Range
Service Lock
PID Lock
Auto Seek
Use Primary Service
Use Backup Service
Description
Setting to Service Lock sets the unit to
decode any PIDs associated with a service
number or service name. Setting to PID
Lock sets the unit to decode only the PIDs
specified in the PID Lock Configuration
matrix. Auto Seek mode will tune the unit to
the first service listed in the PAT if a
transport stream is present.
Sets the service the AG 6000 will tune to in
case of an input failover. If Use Primary
Service is selected the AG 6000 will tune to
the service name specified in the Primary
section. If Use Backup Service is selected
the service name specified in the Backup
section will be tuned. How the AG 6000