Sencore AG 6000 User Manual page 65

OP47
SCTE104
3.2.16.3 SMPTE 2110 Audio Embedding
The Audio selection tab allows for configuration of SDI embedded audio settings based
on the settings chosen from section 3.2.12. The AG 6000 comes standard with the ability
to decode two audio services. With additional licensing the AG 6000 can handle up to
four unique audio services. When licensed for four audio services, the user will have four
audio pairs available to embed audio in the SDI. These two SDI groups provide inclusion
of four audio pairs, with two pairs to each group. All audio pairs share the same options.
Note: From section 3.2.12, if Audio 1's "Processing Mode" is set to "Discrete", then
Audio 2 will only be capable of "PCM", and Audio 3 and Audio 4 will only be capable of
"Pass-through".
Page 65 (122)
AG 6000 – User Manual
Disabled/Enabled
Line Number (4~19)
Disabled/Enabled
Line Number (4~21)
Primary Audio Selection Tab
When enabled, OP47 subtitle data will be
embedded in the VANC.
When enabled, SCTE35 to 104 Embedding
occurs.
Selecting line number determines which
line SCTE104 data starts on.