Sencore AG 6000 User Manual page 58

General
Setting
Video Loss
VANC/HANC
Setting
EIA 708-B
TTX/VPS/WSS
(S2031)
OP47
RDD11
SCTE104
3.2.15.3 UHD/4K Output Mapping
This section only applies to AG 6000 units with the quad 3G-SDI backplate (see section
3.2). With the backplate that has the digital output port (section 3.2.1), it is still possible
to output 4K/UHD with the HDMI connector, but the AG 6000 will only output HD or SD
from the SDI ports.
The UHD selection tab provides configuration of the UHD/4K outputs. The "Output
Mapping" selection configures the quad 3G-SDI outputs to carry a 4K format to a
compatible quad 3G-SDI input device/monitor.
Page 58 (122)
AG 6000 – User Manual
Range
Disable SDI
Display Raster
Ranges
Disabled/Enabled
Line Number (4~21)
Disabled/Enabled
Line Number (4~21)
Disabled/Enabled
Line Number (4~19)
Enabled
Disabled
Disabled/Enabled
Line Number (4~21)
Description
Setting to Disable SDI squelches the SDI
output of the AG 6000 in case of an error
state. Setting to Display Raster the AG
6000 will display a black raster color.
Description
When enabled, EIA 708-B captions will be
embedded in the VANC.
Selecting Line number determines which
line the captions start on.
When enabled, SMPTE 2031 data will be
embedded in the VANC.
Selecting line number determines which
line the SMPTE 2031 data starts on.
When enabled, OP47 subtitle data will be
embedded in the VANC.
Enable/Disable Registered Disclosure
Document 11 (RDD11) embedding in the
VANC.
When enabled, SCTE35 to 104 Embedding
occurs.
Selecting line number determines which
line SCTE104 data starts on.