MRD 6000 – User Manual
4.2.1
Configuring Active Inputs
This menu allows the user to configure a primary and backup input. In case there is an
input failover the MRD 6000 is capable of detecting the failed state and switching to a
secondary backup input in order to provide a continuous output. Which input is primary
and backup, how the inputs switchover and restore and switchover timing is all user
configurable. The user can force the MRD 6000 to switch between the Primary and
Backup Inputs by clicking the
button. To change the active input and
failover settings click the
icon next to Input Selection:
Page 23 (97)