Table of Contents
Advertisement
Installation
Prerequisites and Requirements
Inspecting the Device
Damaged products may cause electric shock or unintended equipment operation.
ELECTRIC SHOCK OR UNINTENDED EQUIPMENT OPERATION
Do not use damaged products.
Keep foreign objects (such as chips, screws or wire clippings) from getting into the product.
Failure to follow these instructions will result in death or serious injury.
Verify the product type by means of the type code
device.
Control Cabinet/Enclosure
Install the device in a control cabinet or enclosure with degree of protection IP54 that is secured
by a keyed or tooled locking mechanism.
The ventilation of the control cabinet/enclosure must be sufficient to comply with the specified
ambient conditions for the device and the other components operated in the control
cabinet/enclosure.
46
DANGER
(see page
19) and the data printed on the
HR9Z-B2190 8/2020
Advertisement
Table of Contents
