Table of Contents
Advertisement
Terminology Derived from Standards
The technical terms, terminology, symbols and the corresponding descriptions in this manual, or
that appear in or on the products themselves, are generally derived from the terms or definitions
of international standards.
In the area of functional safety systems, drives and general automation, this may include, but is not
limited to, terms such as safety , safety function , safe state , fault , fault reset , malfunction , failure ,
error , error message , dangerous , etc.
Among others, these standards include:
Standard
IEC 61131-2:2007
ISO 13849-1:2015
EN 61496-1:2013
ISO 12100:2010
EN 60204-1:2006
ISO 14119:2013
ISO 13850:2015
IEC 62061:2015
IEC 61508-1:2010
IEC 61508-2:2010
IEC 61508-3:2010
IEC 61784-3:2016
2006/42/EC
2014/30/EU
2014/35/EU
12
Description
Programmable controllers, part 2: Equipment requirements and tests.
Safety of machinery: Safety related parts of control systems.
General principles for design.
Safety of machinery: Electro-sensitive protective equipment.
Part 1: General requirements and tests.
Safety of machinery - General principles for design - Risk assessment and risk
reduction
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
Safety of machinery - Interlocking devices associated with guards - Principles
for design and selection
Safety of machinery - Emergency stop - Principles for design
Safety of machinery - Functional safety of safety-related electrical, electronic,
and electronic programmable control systems
Functional safety of electrical/electronic/programmable electronic safety-
related systems: General requirements.
Functional safety of electrical/electronic/programmable electronic safety-
related systems: Requirements for electrical/electronic/programmable
electronic safety-related systems.
Functional safety of electrical/electronic/programmable electronic safety-
related systems: Software requirements.
Industrial communication networks - Profiles - Part 3: Functional safety
fieldbuses - General rules and profile definitions.
Machinery Directive
Electromagnetic Compatibility Directive
Low Voltage Directive
HR9Z-B2190 8/2020
Advertisement
Table of Contents
