Appendix 8.1 Copyright; Terminology/Glossary; Change Information Operating Manual - Optimum OPTidrill DH 24BV Operating Manual

8 Appendix
8.1 Copyright
This document is protected by copyright. All derived rights are reserved, especially those of
translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar
means and recording in data processing systems, either partial or total.
Subject to technical changes without notice.
8.2

Terminology/Glossary

Term
Drill drift
Drill chuck
Drill head
Drill sleeve
Drilling spindle
Drilling table
Taper mandrel
Spindle sleeve lever
Quick-action drill chuck
Workpiece
Tool
8.3

Change information operating manual

Chapter
CE
2 + 4 + 5 + parts + CE
1 + 5
1 + 2
parts
3
Parts list DH28BV
Appendix
Version 1.1.4 - 2022-09-14
Explanation
Tool to release the bit or the drill chuck from the drill spindle
Drill bit adapter
upper part of the drilling machine
fixed hollow shaft which runs in the drill spindle.
Shaft activated by the motor
Supporting surface, clamping surface
Cone of the drill or of the drill chuck
Manual operation for the drill feed
drill holding fixture to be clamped manually.
part to be drilled, part to be machined.
Milling cutter, drill bit, countersink, etc.
Short summary
EC declaration
Machine type DH40BV integrated
new EMC Directive, Low Voltage Directive
Advanced information on inspection schedules
Updated weight of DH40BV
New table for DH28BV
Interdepartmental transport
Spare parts list for DH28BV inserted
Originalbetriebsanleitung
new version number
1.0.1
1.1.0
1.1.0
1.1.1
1.1.2
1.1.3
1.1.4
DH24BV | DH28BV | DH34BV | DH40BV GB
119