Fig. 46: Ethernet Properties Window; Fig. 47: Ip Address And Subnet Mask - Leddar T16 User Manual

3. In the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4), then Properties.
4. Select Use the following IP address and insert an IP address different than the sensor in the IP
address field, for example, 192.168.000.100.
5. Insert the same subnet mask as the sensor (255.255.255.0 by default) in the Subnet mask field.
6. Refer to section "6. Installing Leddar™ Configuration" once the configuration is completed.
54A0043_V4.0_EN / Leddar T16 – User Guide

Fig. 46: Ethernet Properties window

Fig. 47: IP address and subnet mask

59 | 72