Table of Contents
Advertisement
7.2.1.
Recordings (.ltl File)
Detection records provide a playback of detections recorded by a sensor. This visual information can be
useful for verification, troubleshooting or training purposes. Detection records allow for a full data playback
stored in an *.ltl file that you can later reload and replay.
7.2.1.1.
Setting Up Recording Settings
Select Settings > Record. The Record Settings window opens.
1.
Select a directory to save the record file.
2.
Specify a Maximum file size.
3.
Select Debug 1, Debug 2 and Debug 3 only if requested by LeddarTech to activate troubleshooting
information. If activated, the data acquisition rate (Hz) will decrease. Selecting this option activates
advanced debug features and is inefficient for long recordings.
4.
Specify a Maximum record time. Click OK.
The recording's filename will be the sensor name followed by the date and time of the recording. When
recording for a long period of time, an additional file is automatically created every time a recording exceeds
500 MB. You can change the name of the file by changing the device name (see section 7.3.1.1) or after the
recording.
The video section is not available with the "Tolling" configuration and will be grayed out.
34 | 72
Fig. 21: Record Settings window
© 2021 LeddarTech Inc.
Advertisement
Table of Contents
