Distance Measurement; Fig. 5: Leddar T16 "Tolling" Sensor Rear View; Fig. 6: Distance Measurement - Leddar T16 User Manual

Ethernet connector
Brass inserts (two on the back and one on each side of the "Tolling" Sensor) are used to
fix the optional enclosure sunshade only.
3.5.

Distance Measurement

Distance is measured from the screw located on the sides of the Leddar T16 Sensor casing.
The dashed lines illustrate 1 of the 16 segments and the solid line indicates the distance measured by the
sensor in that segment.
54A0043_V4.0_EN / Leddar T16 – User Guide

Fig. 5: Leddar T16 "Tolling" Sensor rear view

Fig. 6: Distance measurement

Protective vent
Brass inserts (4 x)
19 | 72