Preferences; Fig. 42: Preferences Window; Table 30: Preferences Window Options And Settings - Leddar T16 User Manual

7.5.3.

Preferences

To access this function, click Settings > Preferences.
This feature allows you to change various settings related to window display.
With the "Tolling" option, "Leddar T16" is not shown under General.
Option
Units > Distance The unit that is applied to distances displayed in the Leddar
unit Configuration software.
Units > Tempera-
The unit used for displaying sensor temperatures.
ture unit
Select Show error log to display error messages that are logged
Error Log during the current session. Error messages are displayed in the
Error Log section.
The time (in seconds) after a request to the network the system
Network
must wait before the requested operation is canceled.
The main window size can be manually set, and the preferences
selected before connecting to a sensor.
When Fixed aspect ratio is selected, you can enlarge the Leddar
Leddar Configu- Configuration main window while keeping the display height and
ration width ratio.
When both options are selected, you can resize the Leddar
Configuration main window while keeping the display height and
width ratio.
This option is available with the "Traffic" configuration only.
Select this option to change the color and opacity of the grid.
Leddar™ T16
When the Fit image to window (no zoom) option is selected, the
image is resized to fit the main window size. When this option is
deselected, a zooming feature is provided, allowing you to clear
54 | 72

Fig. 42: Preferences window

Table 30: Preferences window options and settings

Description Range
Meter
Foot
Celsius
Fahrenheit
Kelvin
Enabled
Disabled
2 to 30
seconds
N/A
Opacity:
0 to 255
© 2021 LeddarTech Inc.