Image Activation; Grid Activation; Fig. 31: Device State Window; Table 26: Device State - Leddar T16 User Manual

Parameter
Temperature
Timers & Load
Serial Number
Versions
Part Numbers
Ethernet Address
7.4.2.

Image Activation

To access this function, click View > Image.
This feature is available with the "Traffic" configuration only. It allows you to activate or deactivate the sensor
camera and display a live view. When the image is activated, you can take a snapshot of the live image by
clicking and the image will freeze.
7.4.3.

Grid Activation

To access this function, click View > Active Grid.
This feature is available with the "Traffic" configuration only. It allows you to activate or deactivate the grid
that appears in the main window.
To change the color of the grid, select Preferences, then Leddar™ T16. See section 7.5.3 for more details.
54A0043_V4.0_EN / Leddar T16 – User Guide

Fig. 31: Device State window

Table 26: Device State

Indicates the temperature of the sensor and its chip.
Provides information (in days, hours, minutes and seconds) about two types of
activities of a sensor: the first line shows the time elapsed since the last sensor
reset; the second shows the time elapsed since the last power cut or outage.
The CPU Load indicates how much of the sensor processor capacity is in use.
Sensor serial number as assigned by LeddarTech.
FPGA: Sensor firmware version
Software: Sensor software version
CRC: Software cyclic redundancy check for integrity validation
Sensor hardware and software part numbers as assigned by LeddarTech
Also called the "Ethernet MAC address," this is a unique sensor identifier on the
network.
Description
45 | 72