Table of Contents
Advertisement
1.
On your computer desktop, click the Leddar Configuration icon (
following window appears:
2.
Click
to connect to the sensor.
The first time the sensor is connected to a computer, a few seconds are required for Windows to detect
it and complete the installation.
3.
In the Connection window, select a sensor from the list. Information about that sensor will appear
under the list box.
The sensor list displays all the sensors that are currently recognized by the network.
4.
If the sensor is automatically detected, select the available sensor from the list.
5.
Click Connect to connect to the available sensor.
54A0043_V4.0_EN / Leddar T16 – User Guide
Fig. 16: Leddar Configuration opening window
Fig. 17: Connection window
) to open the software. The
27 | 72
Advertisement
Table of Contents
