4.5.
Software System Requirements
Description
Operating system
Memory
Disk space
Communication interface
5.
Installing the Leddar T16 Sensor
5.1.
Installing and Orienting the Sensor
The mounting bracket can be attached to the bottom or top of the Leddar sensor, as shown in the examples
below.
Required tools and materials:
•
10 mm wrench
•
Mounting brackets (customer-supplied)
1.
Use the provided hardware to attach the sensor to the mounting bracket. The supplied lockwashers
must be placed between the bolt head and the bracket. Do not overtighten. The recommended torque
is 60 in.-lb. (6 Nm).
24 | 72
Table 14: Leddar Configuration system requirements
Windows™ 7 and up
1 GB minimum
150 MB minimum
100BASE-T Ethernet
Fig. 12: Mounting position examples
Value
© 2021 LeddarTech Inc.