Moneris Go Plus Setting Up page 19

6. Review the Receipt settings screen and choose an action:
To accept the settings shown and move to the next screen, tap Next.

You will be able to change the settings later.
To change the settings, tap each toggle or field:

Customer receipt format:

you can enable or disable the receipt options available to your
customers. If Cardholder choice is disabled, the application will
automatically print the customer receipt.
Print QR code:

QR codes on all receipts, tap the toggle.
Print delay:

printing the customer receipt and printing the merchant receipt.
Number of merchant receipts:

print a merchant receipt. If you want a receipt for each transaction,
tap the field and select a new value (1 or 2 receipts).
Custom receipt text:

and footers) to the top and bottom of your customer receipts.
When finished, tap Next.

7. Review the Tip settings screen and choose an action:
To accept the settings shown and move to the next screen, tap Next.

You will be able to change the settings later.
To change the settings, tap each toggle or field:

Tips: Enable this setting to prompt customers to leave a tip. Once

you enable Tip Support the tip options will appear.
Tip by dollar:

a dollar amount.
Tip by percentage:

tip as a percentage of the total amount.
Tip pre-set type:

dollar values or percentages of the purchase total, then tap Dollar
or Percentage as required. Depending on your choice, enter dollar
amounts (no cents) or percentages for the pre-set tips below.
Tip Pre-set 1:

defined tip. Tap the Pre-set value field and enter a percentage or a
dollar amount depending on your tip pre-set type above, then tap
the checkmark.
Tip Pre-set 2:

defined tip. Tap the Pre-set value field and enter a percentage or a
dollar amount, then tap the checkmark.
Tip Pre-set 3:

defined tip. Tap the Pre-set value field and enter a percentage or a
dollar amount, then tap the checkmark.
When finished, tap Next.

Moneris® Go Plus: Setting up Your Terminal
When "Cardholder choice" is enabled,
This setting is enabled by default. To stop printing
This setting determines the delay (in seconds) between
By default, the terminal will not
Use this setting to add lines of text (headers
Enable this setting to allow customers to enter a tip as
Enable this setting to allow customers to enter a
Decide if you want your pre-set tips to be fixed
Enable this setting to allow customers to enter a pre-
Enable this setting to allow customers to enter a pre-
Enable this setting to allow customers to enter a pre-
18