Application Setup - Moneris Go Plus Setting Up

Application setup

To set up Moneris Go Plus quickly, simply respond to the prompts on screen. If you need help, follow the step-
by-step instructions in each section below.
1. Tap Go.
2. Wait while the terminal connects to Moneris to obtain your account
settings.
For any connection problems, refer to Troubleshooting on page 23.
Password rules. In the next step, you will be asked to set up a password.
Think of a password now while keeping these rules in mind.
It must be at least 4 characters.

No more than 2 repeating characters. For example, lou449 is acceptable

but lou444 is not.
No common sequences like 123 or abc. For example, jp126 is acceptable

but jp123 is not.
3. Enter your merchant ID using the on-screen keypad then tap the OK
You can find your merchant ID in your welcome email from Moneris.
Moneris® Go Plus: Setting up Your Terminal
key.

16