Chapter 1: Kc705 Evaluation Board Features; Overview; Additional Information; Kc705 Board Features - Xilinx KC705 User Manual

KC705 Evaluation Board Features

Overview

The KC705 evaluation board for the Kintex™-7 FPGA provides a hardware environment
for developing and evaluating designs targeting the Kintex-7 XC7K325T-2FFG900C FPGA.
The KC705 board provides features common to many embedded processing systems,
including a DDR3 SODIMM memory, an 8-lane PCI Express® interface, a tri-mode
Ethernet PHY, general purpose I/O, and a UART interface. Other features can be added by
using mezzanine cards attached to either of two VITA-57 FPGA mezzanine connectors
(FMC) provided on the board. High pin count (HPC) and low pin count (LPC) FMCs are
provided. See
feature are described in

Additional Information

See
relevant to the KC705 board.

KC705 Board Features

•
•
•
•
•
•
•
•
KC705 Evaluation Board
UG810 (v1.4) July 18, 2013
KC705 Board Features
Feature Descriptions, page
Appendix F, Additional Resources
Kintex-7 XC7K325T-2FFG900C FPGA
1 GB DDR3 memory SODIMM
128 MB Linear BPI Flash memory
128 Mb Quad-SPI Flash memory
Secure Digital (SD) connector
USB JTAG via Digilent module
Clock Generation
• Fixed 200 MHz LVDS oscillator (differential)
2
• I C programmable LVDS oscillator (differential)
• SMA connectors (differential)
• SMA connectors for GTX transceiver clocking
GTX transceivers
• FMC HPC connector (four GTX transceivers)
• FMC LPC connector (one GTX transceiver)
• SMA connectors (one pair each for TX, RX and REFCLK)
• PCI Express (eight lanes)
• Small form-factor pluggable plus (SFP+) connector
www.xilinx.com
for a complete list of features. The details for each
9.
for references to documents, files and resources
Chapter 1
7