Table of Contents
Advertisement
Fig. 71:
Commissioning "Smart Access Point": LAN Network settings
7. Network settings
–
If a LAN connection was selected, the IP address must be specified to establish the LAN
connection.
Checkbox "Obtain IP address automatically' is activated:
■
–
The "Smart Access Point" functions as DHCP client.
–
If the "Smart Access Point" is connected to DHCP server/router, the IP address is
assigned automatically.
Checkbox "Obtain IP address automatically' is deactivated:
■
–
The "Smart Access Point" is to be reached in a network that operates with static IP
addresses.
–
Here the network parameters such as IP address, subnet mask and gateway must
be configured manually.
Fig. 72:
Commissioning "Smart Access Point": WLAN connection
System Manual
Commissioning
│95
Advertisement
Table of Contents
