Table of Contents
Advertisement
Concierge call
If a Guard unit is used in the system, the call to the "Guard unit" can be enabled in the outdoor
stations.
This function can only be used by the outdoor station and the gate station of a building. This
■
function cannot be used by additional outdoor stations that are assigned to a unit as private
outdoor station.
If this function is enabled, each incoming call from this outdoor station will be transferred to
■
the "Guard unit".
For enabling, perform the following points:
Start the operation of the outdoor station as normal, see chapter 6.2.4 "Outdoor station with
■
display" on page 70.
–
Then perform the following steps:
Fig. 51:
Outdoor station with display: Setting the concierge call
1. Open the "Settings" / "System settings" function.
System Manual
Commissioning
│75
Advertisement
Table of Contents
