Table of Contents
Advertisement
Fig. 92:
Addressing IP switch actuator
4. Switch to menu "System / Settings" at the indoor station.
–
Switch to function "IP switch actuator setting".
–
The IP switch actuator is searched for automatically.
–
Select the operating mode of the IP switch actuator.
–
IP switch actuator of building: When the IP switch actuator is part of a building.
–
IP switch actuator network: When the IP switch actuator is part of a perimeter.
–
IP switch actuator private: When the IP switch actuator is part of a units network.
–
Addressing the IP switch actuator.
5. Save the entries via the "OK" button.
–
Navigate to the "OK" button at the bottom.
6. Restart the IP switch actuator.
The IP switch actuator is addressed.
System Manual
Commissioning
│113
Advertisement
Table of Contents
