Table of Contents
Advertisement
Operating mode
If an outdoor station is to be set up or added for a perimeter (e.g. park house), it is
commissioned as normal, just like every other outdoor station.
The outdoor station operation for the perimeter is different only in the operating mode and the
physical address.
Perform the following steps for commissioning or adding the outdoor station for the perimeter:
Start the operation of the outdoor station as normal, see chapter 6.2.4 "Outdoor station with
■
display" on page 70.
–
Perform the following deviations at the same time:
Outdoor station with display
Fig. 50:
1. At the outdoor station set the operating mode on "Gate station".
System Manual
/dg_ref_target>
: operating mode
Commissioning
│73
Advertisement
Table of Contents
