Table of Contents
Advertisement
Fig. 105: Adding names: Select outdoor station
4. Select all relevant indoor stations in the building structure.
–
Are the names still unknown, the system names of the indoor station are displayed here
(e.g.: "Indoor station 001-0202-01").
5. Import the selection.
Fig. 106: Adding names: Select outdoor station
–
An entry is created for each previously selected indoor station and displayed on the
outdoor station as well as in the list of the "Smart Access Point".
–
The entries are automatically displayed on the "Real" outdoor station in parallel.
System Manual
Commissioning
│128
Advertisement
Table of Contents
