Table of Contents
Advertisement
Fig. 17:
Mounting the outdoor station: Mounting end piece
3. Mounting the end piece.
–
Attach the end piece on the device slightly offset to the right and press it on.
–
The spring mechanics in the device pull the end piece auromatically into the correct
position when pressed on.
–
The end piece can then be removed again with the enclosed dismantling tool.
5.3.2
Dismantling
The device is mounted from below.
–
The device is secured at the top by the spring pin.
Fig. 18:
Mounting the outdoor station: Dismantling the end piece
1. Dismantle the end piece.
–
Set the enclosed dismantling tool between the cover and the end piece [1].
–
Push out the dismantling tool together with the end piece to the right [2].
System Manual
1
Connection, installation / mounting
2
│40
Advertisement
Table of Contents
