Table of Contents
Advertisement
Fig. 99:
Outdoor station with buttons: Assembling the doorbell buttons
4. Switch to menu "System / Settings" at the indoor station.
–
Switch to function "Outdoor station setting".
–
The outdoor station is searched for automatically.
5. Change to the "Enter push-button address" function.
–
Enter the physical address of the indoor station for each push-button that it is to
activate.
6. Save the entries via the "OK" button.
–
Navigate to the "OK" button at the bottom.
The doorbell push-buttons are assembled.
System Manual
Commissioning
│123
Advertisement
Table of Contents
