14 SETTINGS
14.1.3 Operational settings (U1300)
Down
76
Planmeca ProOne
To adjust the exposure warning signal, to calibrate the
touch panel or to enter the practice mode, first select
Operational settings (U1300)
Operational settings (U1300)
The
Up
•
Exposure alarm settings
First touch and hold the
frequency of the radiation warning tone. Then use the
arrow buttons to adjust the frequency between 500 Hz
(low pitch tone) and 2000 Hz (high pitch tone) and test the
frequency again.
User settings
on the
display will appear.
Test
button to hear the current
User's Manual
display.