Planmeca ProOne User Manual page 31

9.4.1 Selecting imaging position for sinus exposures
Image
position
field
Target position arrows
User's Manual
Accept the selection and return to the main display by
touching the green check mark button in the bottom right
corner of the display.
Touch the image position field in the middle of the display
to select the imaging position for posteroanterior
exposures, or to select the imaging side for lateral or
midsagittal exposures.
The X-ray image in the top right corner of the field shows
where the exposed image will appear on the radiograph.
To select the imaging position for posteroanterior
exposures, touch the target position arrows at the bottom
of the display. The arrow pointing to the left will move the
target position forward and the arrow pointing to the right
will move the target position backward. The marking on
the patient's face demonstrates the imaging position.
NOTE
The imaging position can also be adjusted by touching the
target position arrows on the main sinus display for
posteroanterior exposures.
9 CONTROL PANEL
Planmeca ProOne 27