Planmeca ProOne User Manual page 67

Green
ready indicator light
Amber
exposure
indicator light
User's Manual
On the exposure button a green indicator light will come
on. The Romexis program will show the
Exposure
message on the computer screen.
Ask the patient to stand as still as possible.
Move to a protected area.
Press and hold down the exposure button for the duration
of the exposure. The C-arm will move through one
complete exposure cycle. During the exposure cycle the
radiation warning light on the exposure switch and on the
display will come on and you will hear a radiation warning
tone. When the C-arm has completed the exposure cycle
the temple supports will automatically open. You can now
guide the patient from the unit.
NOTE
Maintain audio and visual contact with the patient and unit
during exposure. If the C-arm stops moving during
exposure, or moves in an erratic way, release the
exposure button immediately.
NOTE
If exposures are taken in rapid succession the X-ray tube
will overheat and a cooling time will be shown on the
display (e.g. Cooling: 21 s). The cooling time indicates the
delay before the next exposure can be taken.
When you have taken the exposure the image will be
shown on the computer screen. Note that you must
accept the image in the Romexis program - only accepted
images will be stored in the database. Refer to the
Romexis User's Manual for further information.
12 SINUS EXPOSURE
Waiting for
Planmeca ProOne 63