Product Label - Tenda AC15 User Manual

 RST: Press and hold it with some needle-like things for about 8 seconds until all the LEDs light
up once and then release it to reset the Router to factory default settings.
 Power on/off: Push it to turn on/off the power supply.
 Power: Power Connector. Insert the included power adapter into this connector.
 USB3.0: USB3.0 port. USB3.0 can be used to connect to a USB storage drive, USB printer, and
etc.
 Internet: WAN port. Connect an Ethernet cable from the Internet side to this port for Internet
access.
 1/2: LAN port. Connect a network device (computer, XBOX, etc.) to this port.
 3: Port 3 is used for IPTV only when IPTV feature is enabled; otherwise, it serves as a LAN port.

4 Product Label

1
*This label can be found on the rear panel of the Router.
1. Default Access: http://tendawifi.com
The default login domain name of the Router. Type the domain name in the address bar of a web
browser to log in to the Router's Quick Setup Wizard or User Interface ( Only when you access the
Router at the first time, or restore the Router to factory default, can the Router log in to the Router's
Quick Setup Wizard).
4
2
3