HEIDENHAIN TNC 620 User Manual page 413
Setup, testing and running nc programs
Hide thumbs
Also See for TNC 620:
- User manual (616 pages) ,
- Operating instructions manual (64 pages) ,
- User manual (598 pages)
Table of Contents
Advertisement
HEROS functions | Ethernet interface
Network settings window
Have a network specialist configure the control.
Open the Network settings window via the Network menu item.
The menu item can be found in the Network/Remote Access group
of the Settings application.
Status tab
The Status tab contains the following information and settings:
Domain
Information or Setting
Domain
The control displays the name under which the
control is visible in the company network. You can
change the name.
The control shows the default gateway and the
Default
Ethernet interface being used.
gateway
You can define the address and the port of a
Use proxy
proxy server in the network.
The control shows an overview of available Ether-
Interfaces
net interfaces. If there is no network connection,
the table is empty.
The control displays the following information in
the table:
Name, e.g. eth0
Connection, e.g. X26
Connection status, e.g. CONNECTED
Configuration name, e.g. DHCP
Address, e.g. 10.7.113.10
Further information: "Interfaces tab ", Page 415
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
10
413
Advertisement
Table of Contents
