HEIDENHAIN TNC 620 User Manual page 132

4
Quick search for the tool name:
If the EDIT soft key is set to OFF, you can search for a tool name.
Proceed as follows:
Enter the first few characters of the tool name, e.g. MI
The control shows a dialog box with the entered text and jumps
to the first match.
Enter additional characters to narrow down the search result, e.g.
MILL
If the control cannot find any more matches for the entered
search string, you can press the last entered character (e.g., L) to
jump between matches, as with the cursor keys.
The quick search can also be used for tool selection in the TOOL
CALL block.
Displaying only specific tool types (filter setting)
Press the TABLE FILTER soft key
Select the desired tool type by soft key
The control displays only tools of the selected type.
Cancel the filter: Press the SHOW ALL soft key
Refer to your machine manual.
The machine tool builder adapts the features of the filter
function to the requirements of your machine.
Soft key Filter functions of the tool table
Select the filter function
Cancel the filter settings and show all tools
Use the default filter
Show all drills in the tool table
Show all cutters in the tool table
Show all taps/thread cutters in the tool table
Show all touch probes in the tool table
132
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Tools | Tool data