HEIDENHAIN TNC 620 User Manual page 359

MOD functions | Setting up touch probes
Setting up a tool touch probe
To set up a tool touch probe, proceed as follows:
Press the CREATE TT ENTRY soft key
The control opens a pop-up window.
Enter a unique name for the touch probe
Press the OK soft key
The control creates a new row in the table.
If necessary, highlight the row with the cursor
Enter the touch probe data on the right side
The control saves the entered data in the machine
parameters.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
9
359