Measuring; Application - HEIDENHAIN TNC 620 User Manual

Testing and running | Measuring
6.5

Measuring

Application

In Test Run operating mode, you can use the MEASURING soft key to
display the following information:
Approximate coordinates as XYZ values
Optional display
FMAX: If the control machines at the maximum feed rate.
Tool number
Tool name
Proceed as follows to select the measuring function:
Set the MEASURING soft key to ON
Position the mouse pointer on the respective
position
The control displays the positioning ball icon and
the surface orientation with a black and white
circle and a perpendicular line on it.
The corresponding information is displayed in a
blue text field.
The MEASURING soft key is available in the following
views:
Plan view
3-D view
Further information: "View", Page 251
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
6
259